Soil Gas Sampling

1/4" X 12" Sub-Slab Stainless Steel Vapor Shaft Tube.

Sub-Slab Tube Plug (FEP).

Sub-Slab Gas Vapor Probe Kits are used to sample for volatile organic compounds (VOCs) beneath floor slabs during vapor intrusion investigations. Sub-Slab Kits provide a semi-permanent probe that allows for repeated sampling over time in order to assess...

Stainless steel (SST) mesh implants are constructed of a double woven SST wire screen. With the stepped fitting, the implant will accept tubing sizes of 1/4" OD through 1/2" OD. The solid threaded end allows for either an anchor point anchor weight or...

Stainless steel (SST) mesh implants are constructed of a double woven SST wire screen. With the stepped fitting, the implant will accept tubing sizes of 1/4" OD through 1/2" OD. The solid threaded end allows for either an anchor point anchor weight or...

3" Stainless Steel Implant, 1/4" SS Compression.

Stainless Steel Hose Barb Adapter SS-4-HC-1-4.

Plug HH-1/4 NPT.

Female Connector SS-400-7-4.

Sub-Slab Gas Vapor Probe Tamper-Resistant Top Cap.

Sub-Slab Gas Vapor Probe Kits are used to sample for volatile organic compounds (VOCs) beneath floor slabs during vapor intrusion investigations. Sub-Slab Kits provide a semi-permanent probe that allows for repeated sampling over time in order to assess...

1/4" Mini Stainless Steel Ball-Valve Adapter.

Concrete core bits include a core body, SDS-Max or Splined adapter, and a starter or pilot bit. This bit has a built-in SDS-Max adapter. Core barrel depth is 3" and the overall length is 22".

1/4" Tee Handle Allen Wrench.

The 6" Gas Vapor Probe (GVP) Implant Drive Kit connects to AMS GVP extension rods and allows you to drive 6" (152 mm) vapor implants to your target depth, using a rotary hammer drill or manual slide hammer attachment. This kit is used for permanent soil...

5/8" National Fine Gas Vapor Probe 6" Implant Tip Drive End.

Dedicated Stainless Steel Vapor Point.

Stainless steel (SST) mesh implants are constructed of a double woven SST wire screen. With the SST swagelok fitting, the implant will accept tubing sizes of 1/4" OD. The solid threaded end allows for either an anchor point anchor weight or open-hole...

Stainless steel (SST) mesh implants are constructed of a double woven SST wire screen. With the SST swagelok fitting, the implant will accept tubing sizes of 1/4" OD. The solid threaded end allows for either an anchor point anchor weight or open-hole...

The 12" Original GVP Base Only is a 1/2" National Fine (NF) thread connection type.