Stainless Steel Bomb Sampler Kit

Get right to liquid sampling with this complete kit!

The Stainless Steel Bomb Sampler Kit is used to obtain liquid samples from the top, bottom, or any intermediate level of storage tanks, tank cars, ponds, lagoons, and wells. The sampler's capacity is 21 oz (628 mL).

For discrete sampling, a suspension nylon rope (sold separately) is connected to the sampler body cable and used to lower the sampler to the desired depth. A second rope (sold separately) attached to the inner rod cable is pulled, allowing the reservoir chamber to fill. Releasing the rope allows the plunger to seal, holding the sample inside.

When sampling where sludge may be present, use the appropriate extension length to sample the liquid right above the sludge layer. There is a 3in, 6in, and 12in extension included. Once the sampler reaches its sampling point, the tip or tip extension should push the spring up and disengage the seals. When it is time, pull up and retrieve the sampler. Once retrieved, empty the sampler into a proper container by pushing the tip or tip extension upward. This should release the liquid sample.

Product Cut Sheet

Kit weighs 13lbs!

Kit Includes:

• #54061 - (1) Stainless Steel Bomb Sampler
• #445.00 - (2) 1/4" X 100' Nylon Rope
• #430.26 - (1) Small Deluxe Equipment Case