Description
Gas Powered Upper Extensions have knurl marks located on the female end. To create a 4' sampler, you WILL need to connect an upper and lower tube together. Upon assembly, you will notice two parallel knurl marks on each sampler tube. Properly connecting your tubes with these knurl marks in the correct position will ensure the proper timing of your sample liner so that there is minimal liner float inside the sampler.
Replacement Parts:
- #61448 - (1) Gas Powered Lower Extension
Related Products
Related Products
Gas Powered Lower Extension
$147.12
Gas Powered Lower Extensions have knurl marks located on the male end. These sampler tubes give you the option of creating a 2' or 4' sampler. If you are looking to achieve a 2' sample, you WILL need...
61448
Soggy Bottom Sampler Sampler Tube Upper Extension
$137.07
Soggy Bottom Sampler Sampler Tube Upper Extension.
5618.167
Gas Powered Drive Tip
$147.12
The Gas Powered Drive Tip is used to penetrate the ground while using the desired tubing for sampling. This tip is only used with the Gas Powered Core Sampling Kit.
61450
Gas Powered Clay Drive Tip
$147.12
The Gas Powered Clay Drive Tip features an aggressive tapered tip with a smaller diameter opening, resulting in better sample recovery in clay soil conditions.This tip is only used with the Gas...
62470
Gas Powered Core Sampling Kit
$5,148.97
You asked, and we listened! The newly improved Gas Powered Core Sampling Kit with the Gas Powered REDI Boss Hammer is ideal for obtaining soil core samples up to a depth of 8'. There are multiple...
360.01
2" Gas Powered Leaf Puller
$283.25
The 2" Gas Powered Leaf Puller quickly adapts to our Foot Jack. This puller has three rings that will take hold of 2" tubing to assist with extracting rods.
64049
Gas Powered Liner Retainer Coupler
$116.48
The liner retainer coupler holds your liner in place inside the lead sampler and allows you to add an additional sampler extension tube.
61642
